How to Change Car Key Battery Nissan: A Step-by-Step Guide

To change the car key battery in a Nissan, first remove the hidden key from the back of the key fob. Then, use a small flathead screwdriver to pop open the key fob housing.

Remove the old battery and replace it with a new one in the same position.

Step 1: Removing The Key Fob Housing

When it comes to changing the battery in your Nissan key fob, the first step is to remove the key fob housing. Follow these simple instructions to access the battery:

Locate The Hidden Key Slot On The Back Of The Nissan Key Fob

Flip over your Nissan key fob and look for a small, hidden key slot on the back. It can usually be found near the logo or on the edge of the fob. This key slot is used to open the key fob housing and access the battery.

Use A Small Flathead Screwdriver To Carefully Pop Open The Key Fob Housing

Once you have located the hidden key slot, take a small flathead screwdriver and insert it into the slot. Gently apply pressure and twist the screwdriver to pop open the key fob housing. Be cautious while doing this to avoid any damage to the key fob or the internal components.

Once the key fob housing is open, you will have clear access to the battery. At this point, proceed to the next step to remove the old battery and replace it with a new one.

Step 2: Removing The Old Battery

To change the car key battery in your Nissan, start by removing the hidden key from the back of the key fob. Use a small flathead screwdriver to pop open the housing, then take out the old battery, noting its position.

Finally, put the new battery in the same position and reassemble the key fob.

Observe The Position Of The Old Battery Inside The Nissan Intelligent Key.

When it’s time to change the battery of your Nissan car key, it’s important to first observe the position of the old battery inside the Nissan Intelligent Key. This will help ensure that you properly install the new battery in the same position, without any confusion or errors. Take a look at the old battery and note its orientation and position inside the key fob. By doing so, you will have a clear reference point to follow when inserting the new battery.

Carefully Remove The Old Battery From The Key Fob.

Once you have observed the position of the old battery, it’s time to carefully remove it from the key fob. To do this, follow these steps:

1. Locate the small release latch on the key fob.
2. Use a small flathead screwdriver or a similar tool to gently pry open the key fob housing.
3. Inside the housing, you will find the old battery. Take note of its position once again.
4. Carefully remove the old battery from its slot, making sure not to damage the key fob or the battery itself.

By taking your time and being cautious, you can successfully remove the old battery without any issues. Remember to handle the battery with care, as it may still have some charge left and could cause harm if mishandled.Now that you have successfully removed the old battery, you’re ready to move on to the next step of replacing it with a fresh one.

Step 3: Placing The New Battery

To change the car key battery on a Nissan, start by removing the hidden key from the back of the key fob. Then, use a small flathead screwdriver to pop open the key fob housing. Remove the old battery, noting its position, and place the new battery in the same position.

To successfully change the car key battery in your Nissan, follow these simple steps to ensure a smooth and hassle-free process:1. Take the new battery and place it in the same position as the old one. Make sure the positive (+) and negative (-) ends are aligned correctly. This is crucial for the key fob to function properly.2. To ensure the correct polarity, align the plus (+) and minus (-) symbols on the battery with the corresponding symbols in the key fob. Double-check to ensure that the battery is inserted securely and clicks into place.Remember, while this process may seem straightforward, it is essential to take your time and handle the battery with care. Incorrectly placing the battery can result in a malfunctioning key fob or damage to the internal components.By following these steps, you can easily replace the battery in your Nissan key fob, saving time and money on professional assistance. Now, you can enjoy uninterrupted access to your vehicle with a fully functional key fob.Changing the battery in your Nissan key fob is a quick and simple task that you can easily do at home. With proper maintenance and replacing the battery when needed, you can ensure the longevity of your key fob and hassle-free access to your Nissan vehicle.

Credit: www.charlieclarknissanbrownsville.com

Step 4: Closing The Key Fob Housing

To change the car key battery for a Nissan, start by removing the hidden key from the back of the key fob. Use a small flathead screwdriver to pop open the key fob housing. Take out the old battery, making note of its position, and replace it with a new one in the same position.

Close the key fob housing and you’re done! Find more detailed tutorials on YouTube.

Carefully Align The Key Fob Housing And Snap It Back Into Place.

Once you have successfully replaced the old battery with a new one, it’s time to close the key fob housing. This step is crucial to ensure that the battery is securely in place and the key fob functions properly. Begin by carefully aligning the key fob housing with the base of the key fob. Make sure that all the buttons on the housing are aligned with their respective slots on the base.

Ensure A Secure And Tight Fit To Prevent Any Damage Or Accidental Opening.

To ensure a secure fit, apply gentle pressure to the top of the housing and push it downward until it snaps into place. Listen for a distinct click, indicating that the housing is securely fastened. Check that none of the buttons are sticking out or misaligned. A secure and tight fit is essential to prevent any damage or accidental opening of the key fob.Once you have closed the key fob housing, give it a gentle shake to make sure it doesn’t rattle or feel loose. If you notice any movement or hear a rattling sound, it means the housing is not securely closed. In such cases, re-open the key fob housing and repeat the process, ensuring a proper alignment and tight fit.Remember, the key fob housing acts as a protective cover for the electronic components inside the key fob. Therefore, it is important to close it properly to safeguard the internal circuitry from any external elements.In conclusion, closing the key fob housing is a simple yet crucial step in changing the car key battery for your Nissan. By following these instructions and ensuring a secure and tight fit, you can confidently replace the battery and have your key fob working smoothly again.

Step 5: Testing The New Battery

To change the car key battery of a Nissan, start by removing the hidden key from the back of the key fob. Then, carefully open the key fob housing with a small flathead screwdriver. Take out the old battery while noting its position, and replace it with a new one in the same position.

After successfully replacing the old battery with a new one in your Nissan key fob, it is crucial to test whether the new battery is working properly. Testing the new battery will ensure that your key fob functions as expected and that all remote functions are responsive. In order to do this, follow the steps below:

1. Press Any Button On The Key Fob To Test If The New Battery Is Working Properly.

To verify that the new battery is functioning correctly, simply press any button on the key fob. If the battery is in good condition, you should feel a responsive click when pressing the buttons. This indicates that the signal from the key fob is being transmitted to your Nissan’s central locking system.

2. Ensure The Remote Functions Are Responsive And The Key Fob Is Functioning As Expected.

In addition to testing the buttons, it is essential to check if all remote functions on the key fob are working as expected. This includes functions such as locking and unlocking the doors, opening the trunk, and activating the panic alarm. Ensure that the key fob is responsive and that these functions are executed smoothly with the new battery in place.If you notice any issues or if the remote functions are not working properly, it may indicate a problem with the new battery. In such cases, carefully repeat the previous steps to ensure that the battery is correctly installed. If the problem persists, it may be necessary to consult a professional for further assistance.Remember, regularly changing the battery in your Nissan key fob is important to ensure optimal performance and to avoid the inconvenience of a dead key fob. By following the steps outlined in this guide, you can easily replace the battery and test its functionality, ensuring that your Nissan key fob continues to function flawlessly.

Frequently Asked Questions On How To Change Car Key Battery Nissan

What Kind Of Battery Does A Nissan Key Fob Take?

The Nissan key fob takes a round, flat battery, shaped like a coin. To change the battery, remove the hidden key, open the key fob housing, replace the old battery with a new one in the same position, and close the housing.

Can I Change My Car Key Battery Myself?

Yes, you can change your car key battery yourself. It’s a simple and cost-effective process that doesn’t require any specialized skills. Just follow the instructions provided by the car manufacturer or refer to online tutorials for your specific car model.

Remember to use the correct type of battery and be cautious while opening the key fob.

What Happens When Nissan Key Battery Dies?

When the Nissan key battery dies, you can still use the physical key to unlock your Nissan. To access the key, flip the key fob over and push the small release latch. This will unlock the emergency key hidden at the bottom.

How Much Is A New Nissan Key Battery?

A new Nissan key battery typically costs around $5 to $10. It’s a small, round, coin-shaped battery that can be easily replaced at home without any special skills or tools. When the battery dies, you can still access and unlock your Nissan using the key included with the key fob.

How Do You Change The Battery In A Nissan Key Fob?

To change the battery in your Nissan key fob, remove the hidden key from the back of the fob and use a small flathead screwdriver to open the housing. Take out the old battery and replace it with a new one in the same position.

Conclusion

Changing the car key battery in your Nissan is a simple process that anyone can do at home. By following the steps outlined in this blog post, you can easily replace the battery in your Nissan key fob and ensure that it continues to operate smoothly.

Taking a few minutes to change the battery can save you the hassle of a dead key fob in the future. So, grab your screwdriver and a new battery, and get ready to keep your Nissan key fob powered up and ready to go!